1. پرینتر سه بعدی
2. دستگاه cnc

مشخصات LCD گرافیکی 128 در 64 پرینتر سه بعدی:

1. ولتاژ تغذیه: 5 ولت
2. فرمت شبکه ای: 64 × 128
3. کنترلر: ST7920
4. ابعاد: 12.5 × 70 × 78 میلی متر
5. اندازه سوراخ: 0.55 × 0.39 میلی متر
6. فاصله مرکزی سوراخ: 0.6 × 0.44 میلی متر
7. ابعاد صفحه: 44 × 62 میلی متر
8. دمای کاری: 70 ~ 20- درجه سانتی گراد
9. رنگ صفحه نمایش: آبی
10. رنگ کاراکتر: سفید

The post LCD گرافیکی 128 در 64 پرینتر سه بعدی برند MKS appeared first on سی زان شاپ.

The post برد توسعه پاور هیت بد و اکسترودر MKS HOTBED MOS+ V1.1 appeared first on سی زان شاپ.

Introduce:

MKS-HLKWIFI is created by MakerBase(MKS) based on HLK-RM04 module, which is suitable for open-source 3D printer. Also, MKS-HLKWIFI is used for MKS Base (updated version 1.2), MKS Gen, MKS Mini, MKS SBase, etc, those are developed by MakerBase, as well as MKS TFT touch screen.

Features:

1. Based on strong and stable HLK-RM04 module.
2. Using on MKS motherboard directly.
3. Work with MKS TFT28 touch screen and all MKS series modules.
Notice: Due to undercurrent, MKS HLKWIFI can not work with Ramps1.4.

Package includes:

1 x 3D Printer Control Board MKS HLKWIFI Module

Please visit here to download firmware: click to open
github.com/makerbase-mks

Appendix 1 Connection:

Connect to Aux-1 on MKS BASE, MKS MINI, MKS SBASE, MKS GEN. MKS BASE only supports V1.2 updated version.

Usage on Motherboard:

1. Connect WIFI module to AUX-1.
2. Search for WIFI hotspot and connect.
1). Search hotspot HI-LINK-XXXX, and connect. Password: 12345678;
2). If you can not find the hotspot , press on button of module for 10 seconds, then restore factory settings.
3). Attention: Under default, the baud rate of HLKWIFI is 115200, which must be as the same as firmware.

3. Configuration on MKS HLKWIFI
1). After enter HI-LINK-XXXX, connect to IP: //192.168.16.254;
2). Log in:  accounts: admin;  password: admin.
3). Proceed network configuration and modify the Client you need.
4). Any other help, please refer to HLK-RM04 user manual 1.31.pdf.

4. The use of remote control of the printer Printrun
Note: Enter the IP address 192.168.16.254:8080 of the WIFI at Port

5. Use Repetier-Host remote control printer
Note: Connecting terminal select TCP / IP

6. Use APP control the printer

Appendix 2 Connection:

Connect to MKS TFT28 touch screen:

mks_config.txt Wifi configuration (MKS TFT28 only supports V1.1 updated version)

1. The Wifi mode selection
Change the value behind the colon of “cfg_wifi_mode” into the Wifi network you need (“1” is AP mode, “0” is client mode).

2. The wifi configuration of client mode
A. Wifi name: change the Wifi name behind the colon of “cfg_wifi_ap_name” into your wireless network.
B. Wifi password: change the Wifi password behind the colon of “cfg_wifi_key_code” into your wireless network’s password.
C. Dynamic accessing IP: set the value behind the colon of “cfg_ip_dhcp_flag” into you need (“0” indicates static IP, “1” indicates dynamic IP).
D. IP: change the IP behind the colon “cfg_ip_address” into you need.
E. IP mask: change the IP mask behind the colon of “cfg_ip_mask” into you need.
F. Gateway IP: change the gateway behind the colon of “cfg_ip_gate” into you need.

3. Wifi configuration instruction on AP module
A. Wifi name : change the WIFI name behind “cfg_wifi_ap_name” into the hotspot name you need .
B. WIFI password : change the WIFI password behind “cfg_wifi_key_code” into password of wifi hotspot, and save it .

The post ماژول وای فای MKS HLKWIFI مخصوص بردهای MKS TFT appeared first on سی زان شاپ.

The post برد کنترلر پرینتر سه بعدی 32 بیتی MKS Duet 2 wifi به همراه ال سی دی تاچ appeared first on سی زان شاپ.

The post درایور استپر موتور MAKERBAS MKS TMC2160_OC appeared first on سی زان شاپ.

Working process
1.When AC power supply is cut off, the MKS UPS detects it and send signal to motherboard
2. The power stored in the MKS UPS and PSU continues to supply power to the motherboard
3. Motherboard detects the power-off signal, stop printing, turn off hotbed and hotend, lift Z axis;
4. The power stored in MKS UPS is generally lift Z axis 20mm-200mm
5. When power supply is restored, resume printing through the 12864/2004 LCD screenWiringTake MKS SGEN L as an example

The post ماژول تشخیص قطع برق MKS UPS 12V POWER OUTAGE DETECTION appeared first on سی زان شاپ.

The post درایور استپر موتور MKS TMC2209 appeared first on سی زان شاپ.

https://github.com/makerbase-mks/MKS-Monster8

MKS Monster8 یک مادربرد 8 محوره ساخت شرکت میکیربیس (MakerBase)  است که می توان از آن برای ساخت پرینتر سه بعدی voron یا هر پرینتر سه بعدی دیگر استفاده کرد. از فریمور marlin 2.0.x و klipper پشتیبانی می کند. پشتیبانی از MKS TS35، MKS MINI12864 و سایر نمایشگرهای ال سی دی. پشتیبانی از چاپ بروی فلش مموری و پشتیبانی از حالت DFU

The post برد کنترلر پرینتر سه بعدی MAKERBASE MKS MONSTER8 V2 32BIT appeared first on سی زان شاپ.

Working process
1.When AC power supply is cut off, the MKS UPS detects it and send signal to motherboard
2. The power stored in the MKS UPS and PSU continues to supply power to the motherboard
3. Motherboard detects the power-off signal, stop printing, turn off hotbed and hotend, lift Z axis;
4. The power stored in MKS UPS is generally lift Z axis 20mm-200mm
5. When power supply is restored, resume printing through the 12864/2004 LCD screenWiringTake MKS SGEN L as an example

The post ماژول تشخیص قطع برق MKS UPS 24V POWER OUTAGE DETECTION appeared first on سی زان شاپ.

this wifi module was created and developed by Makerbase team,

that state ishigh transfer speed and stability.

and, it is compatible strongly with MKS Robin mainboard.

it not only supports document transfer via APP,

but also supports Cloud printing and firmware upgrading.

Packing list

1 * MKS Robin-WIFI module V1.0

Specifications

size: 25 * 23mm
language: EN / CN (Auto-ID)
How to Download APP

1. For Android / IOS, it is capable of searching MKSCLOUD on APP STORE.

2. Visit next link

https://baizhongyun.cn/home/index

The post ماژول وای فای MKS ROBIN-WIFI مخصوص برد MAKERBASE STM32 MKS ROBIN appeared first on سی زان شاپ.